Horizontal Specs & Options

TITAN® is now available in multiple sizes and configurations. All TITAN® models are designed for ease of installation and cost-effective transport.

Low Pressure Table
High Pressure Table
Options

View Imperial Measurements

Model	H2	H4	H6	H8	H10
Hearth Gross Capacity, lbs	2000	4000	6000	8000	10,000
Effective Work Area, inches (W x H x D)	18 x 18 x 24	24 x 28 x 48	36 x 36 x 48	48 x 48 x 72	60 x 60 x 72
Work Zone, ft³	4.5	16	36	96	150
Quench Pressure	2 bar	2 bar	2 bar	2 bar	2 bar
End Elements	N/A	N/A	N/A	Option	Option
Footprint, inches (W x D)	90 x 160	180 x 180	180 x 180	210 x 220	240 x 240
Power Requirements (AMPS), 460 Volts, Basic Furnace	90	250	300	475	600
Water cooling requirements, gpm @ 40 psi	80	200	200	300	400
Fits in one standard shipping container
Shipping weight (furnace only), lbs	12000	28000	29000	35000	41000
Click thumbnail to enlarge:

All dimensions and specifications are approximations and for reference only

View Metric Measurements

Model	H2	H4	H6	H8	H10
Hearth Gross Capacity, kg	900	1800	2700	3600	4500
Effective Work Area, mm (W x H x D)	455 x 455 x 610	610 x 710 x 1220	915 x 915 x 1220	1220 x 1220 x 1830	1525 x 1525 1830
Work Zone, m³	0.13	0.45	1.02	2.72	4.25
Quench Pressure	2 bar	2 bar	2 bar	2 bar	2 bar
End Elements	N/A	N/A	N/A	Option	Option
Footprint, mm (W x D)	2300 x 4100	4600 x 4600	4600 x 4600	5350 x 5600	6100 x 6100
Power Requirements (AMPS), 380/400 Volts, Basic Furnace	105	300	350	550	700
Water cooling requirements, l/m @ 275 kPa	300	800	800	1150	1500
Fits in one standard shipping container
Shipping weight (furnace only), kg	5500	12700	13200	16300	18600
Click thumbnail to enlarge:

All dimensions and specifications are approximations and for reference only

View Imperial Measurements

Model	H2	H4	H6	H8	H10
Hearth Gross Capacity, lbs	2000	4000	6000	8000	10,000
Effective Work Area, inches (W x H x D)	18 x 18 x 24	24 x 28 x 48	36 x 36 x 48	48 x 48 x 72	60 x 60 x 72
Work Zone, ft.³	4.5	16	36	96	150
Quench Pressure	12 bar	12 bar	12 bar	6 bar	6 bar
End Elements	N/A	N/A	N/A	Option	Option
Footprint, inches (W x D)	90 x 169	180 x 180	180 x 180	220 x 220	250 x 240
Power Requirements (AMPS), 460 Volts, Basic Furnace	150	300	400	500	600
Water cooling requirements, gpm @ 40 psi	150	275	375	450	550
Fits in one standard shipping container
Shipping weight (furnace only), lbs	13000	29500	30500	38000	44000
Click thumbnail to enlarge:

All dimensions and specifications are approximations and for reference only

View Metric Measurements

Model	H2	H4	H6	H8	H10
Hearth Gross Capacity, kg	900	1800	2700	3600	4,500
Effective Work Area, mm (W x H x D)	455 x 455 x 610	610 x 710 x 1220	914 x 914 x 1220	1220 x 1220 x 1830	1525 x 1525 x 1830
Work Zone, m³	0.13	0.45	1.02	2.72	4.25
Quench	12 bar	12 bar	12 bar	6 bar	6 bar
End Elements	N/A	N/A	N/A	Option	Option
Footprint, mm (W x D)	2235 x 4013	4572 x 4394	4572 x 4394	6000 x 6000	6350 x 6100
Power Requirements (AMPS), 380/400 Volts, Basic Furnace	175	350	475	600	700
Water cooling requirements, l/m @ 275 kPa	570	1040	1420	1700	2080
Fits in one standard shipping container
Shipping weight (furnace only), kg	5900	13400	13800	17200	20,000
Click thumbnail to enlarge:

All dimensions and specifications are approximations and for reference only

The versatile Titan vacuum furnace offers multiple standard options that allow heat treaters to enhance the system to their specific needs and still stay within their budget.

To learn about custom options, contact your Ipsen representative.

Click any image below to see a larger view:

High Vacuum - Diffusion Pump & High Vacuum Valve - Holding Pump - Piping & Valving	Water - Single closed-loop system - 350 gallon reservoir tank - Pump station - Type 2 furnaces only	Metal Hot Zone - Molybdenum and stainless steel shields - Molybdenum hearth posts and rails - Stainless steel frame	Power - 220-460 Volts - 50/60 HZ - 3 Phase	Loader - 3000 lbs capacity - Electric lift Type 2 - Manual lift Type 4 or 6 - Built in Charger
Backfill Reservoir - ASME code tank - Horizontal or vertical mount - Includes pressure guage, check valve and ball valve	Expert Controls - Interactive program generation - Visualization of load configuration - Integrated time temperature transformation (TTT) diagrams	Parts - Consumable and preventative maintenance items to help ensure equipment uptime	Uniformity Fixture - Designed for the TITAN® hot zone work area - RA330 material - Furnished less thermocouples	Convection - Shorter cycle times - Convection heating to 1,600°F, 2-bar max