Installation

Fast, Easy, Hassle-free
HybridCarb® can be installed in hours. It is intuitive, operator-friendly and its compact roll-in design fits almost anywhere taking up much less space than your typical Endothermic Generator. It does not require riggers, and connects to the existing utilities while having almost no hardwire break-ins to the original controlling system. The original alarm and safety sequences are unaffected by the installation of HybridCarb. This green technology offers a nearly hassle-free solution using less floor space and less piping than Endothermic generators, and it reduces costs immediately upon installation.

Works with Existing Equipment
HybridCarb interfaces with the existing gas safety panel. In addition, the installation of Ipsen's Trunk Module (patent pending) into one of the sidewalls of the heating chamber is required. The Trunk Module extracts the process gas out of the heating chamber sending it to be reconditioning and then, delivers the reconditioned gas back into the heating chamber as needed. The Trunk Module is designed to work in conjunction with the combustion blower of the heating chamber during the atmosphere circulation phase, which provides a sufficient separation between extracted (used) gas and recycled (reconditioned) gas.

Virtually No Change in Furnace Control
The only change in the furnace controls is the installation of a manually operated switch in order to activate the HybridCarb system. This switch can also be installed directly into the control unit of the HybridCarb, and includes an electrical bypass that monitors the amount of protective gas in the furnace's gas safety panel when the HybridCarb system is activated. All other security queries of the existing furnace installation remain active and will not be affected by the start-up of the HybridCarb system.

The existing furnace hardware and software including all probes, sensors, analyzers and the furnace gas safety panel are still responsible for creating and executing the heat treatment programs, temperature control and C-potential control in the heating chamber. In the same respect, all safety devices and original adjustments remain active on the furnace.